Grone 39 147, Manual

Page: 70 / 92

35
Cleaning and Maintenance
Disassemble the Nozzle Shutter Reassemble the Nozzle Shutter
Turn off the Auto Clean and Aute
Seat Open buttons.
Open the seat and cover.
Press Nozzle Cleaning button [A] to
make the nozzle reach out.
1.
2.
3.
4.
5. Press the STOP button [B] to return
the nozzle to its original position.
6. Clean the disassembled shutter.
Otherwise, it may detect the human body
and close the seat and flush automatically.
Uplift the nozzle shutter when nozzle
reaches out.
Pull the shutter right ahead and
disassemble it.
If the nozzle reaches out, press Stop to retract it.
[Cautions]
●
Press the buckles till a click is heard. Make
sure the shutter is correctly reassembled.
●
The shutter falls into up and down
orientations, and can only be reassembled
to the designated orientation.
●
Do not over exert strength.
Otherwise breakage may be caused.
[Cautions]
●
Do not scrub with dry cloth or toilet paper.
●
Do not scrub with tooth brush.
Scratches may be caused.
●
Do not use detergent that contains abrasive
materials or brush.
Otherwise the PLUS GUARD effect may be reduced.
The nozzle shutter can be taken out to clean.
●
Apply neutral detergent on soft cloth or sponge and scrub the
nozzle shutter after being moistened with cold or warm water.
Clean the Nozzle Shutter
[A]
[B]
1. While the nozzle is retracted, firmly
press the two tabs into the slots on
the base as shown in the diagram.