Grone 39 147, Manual

Page: 71 / 92

36
Cleaning and Maintenance
The Spray nozzle can be cleaned using either of the methods listed below.
● The nozzle can be cleaned using the Nozzle cleaning button on the remote control unit.
● The nozzle can be cleaned manually.
Cleaning the Nozzle with the Remote Control Unit
• To clean the nozzle while using the toilet
(sitting on the seat) using the remote
control unit, follow the procedure below.
1 Press the Nozzle Cleaning button [A].
* The nozzle remains retracted inside the body and is
cleaned for approximately 15 seconds.
* This toilet is equipped with an auto cleaning function ,
which cleans the nozzle and surroundings automatically
before and after the rear cleansing, rear cleansing - mild
or front cleansing function.
Cleaning the Nozzle Manually
• To clean the nozzle manually, follow the
procedure below.
1 Turn off the Auto Clean [B] and Auto Seat
Open [C] buttons.
* This will disable the automatic lid and automatic fl ush
functions.
2 Lift the seat lid and seat.
3 Press the Nozzle Cleaning button.
* Water comes out from a point near the nozzle tips for
approximately 5 seconds. The rear cleansing nozzle
extends and oscillates in a short stroke. Water is not
sprayed during this cleaning function.
[Note]
• The Nozzle Cleaning feature should be operated when the
toilet seat is raised.
* When the toilet seat is lowered, the nozzle does not
extend while it is being washed.
Cleaning the Nozzle
[A]
[C]
[B]
SENSIA