Grone 39 147, Manual

Page: 49 / 92

14
General Operation
SENSIA
STEP
1
Auto Seat Open Function
• Press the Auto Seat Open button [A] to
activate this feature.
* If the seat sensor is not activated after the seat lid opens independently, the seat lid automatically closes after approximate-
ly one minute.
* The upper body sensor detects the motion of a person and automatically opens the toilet seat lid.
• To open the toilet seat lid and toilet seat simultaneously
Press the STOP and Open/Close buttons simultaneously for 2 seconds.
* A short beep sounds when the setting is complete.
* The seat and seat lid close approximately 1 minute after the user leaves the toilet.
* Press the STOP and Open/Close buttons simultaneously for 2 seconds to reset.
A beep sounds when the setting is complete.
To manually open and close the toilet seat lid or seat
Press the Auto Seat Open button to deactivate this feature.
* The “AUTO SEAT-OPEN” display on the LCD disappears.
* When a small child uses the toilet, turn off the auto seat open function. The seat sensor may not be able
to detect a small child’s body, and, although rare, the toilet seat lid may start to close during use.
* The toilet lid will not open for 10 seconds after it is closed manually.
To open and close the toilet seat with the remote control
1 Press the Open/Close button [B] to open
the toilet seat.
2 Press the Open/Close button [B] again to
close the toilet seat.
[Note]
● Avoid direct sunlight, as this may cause the sensor to malfunction and the toilet seat lid to automatically open.
* “AUTO SEAT-OPEN” button appears on
the LCD.
* The function is set to “ON” in the default
settings.
[A]
[B]