![background image](http://html1.mh-extra.com/html/grone-0/2560-601400/2560-601400_operating-instructions-manual_2269690025.webp)
25
To change for another set for fl uid:
1.
Loosen and remove the hood of the air nozzle.
2.
Unscrew and remove the nozzle. Both during screwing and unscrewing the nozzle, pull the
trigger away maximally and hold it to prevent contact surfaces of the nozzle or needle from
getting damaged.
3.
Unscrew the fl uid fl ow regulation knob maximally and remove it together with the spring.
4.
Remove the needle through the back of the gun.
5.
Place all the parts back in reverse order.
SPRAYING TECHNIQUE
Hold the gun approx. 150 to 200mm away from the surface being sprayed. Do not move your arm in a
circular motion. It is recommended to hold the gun perpendicularly to the surface and move it parallel
to the surface. Make sure that the gun is being moved before you pull the trigger. Pull the trigger when
the gun is being moved. Each stroke should overlap the existing one in 50%.
AIR NOZZLE
HOOD
RATAINING
RING
NOZZLE
TRIGGER
SPIRE
MATERIAL FLOW REGULATION KNOB
INCORRECTLY
CORRECTLY
150 to 200 mm
HVLP_Turbo_Full_v05_HR.indd 25
HVLP_Turbo_Full_v05_HR.indd 25
2016-10-25 21:44:00
2016-10-25 21:44:00