Groeneveld TriPlus Trailer, General Manual, Page: 51 / 58

Automatic Greasing System TriPlus Trailer
Maintenance 51
Date of
is
sue :
Sept
e
m
ber
2
012
F212157R02
6. Maintenance
6.1 General
The maintenance of
Groeneveld’s
TriPlus systems can be combined with the normal maintenance
of the vehicle or machine.
6.2 Regularly checks of the greasing system
Check the following points of the TriPlus greasing system:
1.
The grease level in the reservoir of the pump unit (refill on time).
2. The pump unit for damage and leakage.
3. The operation of the whole greasing system. Perform a test cycle for every grease output port
of the pump unit. Retrieve the fault codes stored in the control unit, either by using the test
pushbutton on the pump unit or by connecting a GINA to the control unit.
4. The primary and secondary grease lines for damage and leakage.
5. The grease points, collar of fresh grease should be present at all grease points.
WARNING
If a high-pressure steam/water jet is used to clean the vehicle or machine, the pump unit of the
greasing system should not be directly exposed to the jet. This to prevent water from entering the
pump unit through its de-aerating opening. During normal operation, however, water will never
be able to enter the pump unit.
ATTENTION
The automatic greasing system reduces the time and effort spent on manual greasing significantly.
However, do not forget that there may be grease points that are not served by the greasing system
and must still be greased by hand.