
Automatic Greasing System
TriPlus Trailer
The GINA
23
Date of
is
sue :
Sept
e
m
ber
2
012
F212157R02
3.6
Parameters timer
The parameters timer menu contains the parameter settings for the grease cycle. You can view and/
or change these parameters, provided you have the correct ‘access level’.
Press <
parameters
>
The screen shows the grease output (in cc) of output port 1.
The grease output set must match the grease demand per
greasing cycle of the branch of the greasing system
connected to this output port.
Range: 0,0 ... 999,9 cc
The location of the cursor (the flashing square) indicates the
digit will be changed; after you entered a digit, the cursor
will automatically move forward to the next digit. Press
<ENTER> when you are satisfied with the setting. The cursor
will then disappear from the screen.
Press <F2> (
rdlv
).
The screen shows the output (in cc) of the plunger pump per
revolution of its drive shaft (determined by the stroke
length and diameter of the plunger). With this para-meter
the program will be able to calculate the number of
revolutions needed to achieve a certain grease output
during each greasing cycle.
The default value is 0,10 (cc/r) and may not be changed.
Press <F3> (
cbp
).
The screen shows the duration of the greasing interval,
expressed in brake commands.
Range: 0 ... 65535 brake commands.
If necessary, change this value and confirm with <ENTER>.
Press <F4> (
psdt
).
The screen shows the delay (in milliseconds) between the
activation of the brake lights of the vehicle and the start of
the pump of the greasing system. This delay prevents the
fuse from blowing, which would be likely to happen if both
were switched on simult-neously.
The default is 300 ms and this should not be changed.
Press <NEXT>.
PARAMETERS TIMER
Delivery
xxx.x [cc]
del rdlv cbp
psdt
PARAMETERS TIMER
Rotation delivery
x.xx [cc/r]
del rdlv cbp
psdt
PARAMETERS TIMER
Cycle brake pulses
xxxxx
del rdlv cbp
psdt
PARAMETERS TIMER
Pump startup delay
xxxxx [msec]
del rdlv cbp
psdt
Summary of Contents for TriPlus Trailer
Page 57: ......