Model T31634/T31635 (Mfd. Since 8/19)
-31-
2. Lift bevel lock handle to unlock tilt position
(see
Figure 51).
Figure 51. Bevel lock.
Bevel Lock
Handle
Cutting Bevels
For simple angle cuts, i.e. cuts that only require
the angle to be changed on one plane, either the
miter or bevel feature can be used. This choice
depends on the size of the workpiece and user
preference. The same 45
˚ joint could be cut by
adjusting the miter or the bevel, but one may
require the workpiece to be less supported on a
thinner edge, so users should bear this in mind
when selecting which to use.
To perform a bevel cut:
1. DISCONNECT MACHINE FROM POWER!
Figure 50. Miter saw tilted to 45˚ bevel angle.
The bevel affects the angle of the blade in relation
to the table.
3. Pull bevel release pin and use operating
handle to push cutting head to desired angle
(see
Figure 52).
4. Use bevel lock handle to lock head position.
5. Refer to Performing Cuts on Page 26 for
proper cutting procedures.
Figure 52. Bevel angle.
Bevel
Release Pin
Bevel Angle
Scale
Indicator
Summary of Contents for T31634
Page 64: ......
