Grizzly G0911, Owner'S Manual

Page: 37 / 100

Figure 38. Example of IP address setting dialog
box.
Figure 39. Control panel layout.
Model G0911–G0914 (Mfd. Since 05/21)
-35-
Saving .RD File Using Ethernet Cable
1. Connect ethernet cable to machine ethernet
port, then connect opposite end of cable to a
personal computer running RDWorks.
2. Turn machine ON and wait for startup proce-
dure to complete.
3. In RDWorks output panel, select "USB:Auto"
to open "Device Ports" dialog box (see
Figure 36 on Page 34).
4. Select "Web" and click "Add" button to open IP
Address Setting dialog box (see
Figure 38).
5. Designate machine name and enter IP
address of machine as determined by net-
work connection, then click "Ok".
Note: Press "Test" button to verify network
connection has been established.
6. Click "Ok" to return to output panel (see
Figure 35 on Page 34).
7. Select "Download", and then proceed to
Loading .RD File From Machine Memory
on
Page 36.
Item Needed
USB Flash Drive (Included w/Machine) ............. 1
Transferring .RD File w/USB Flash
Drive
1. Turn machine ON and wait for startup proce-
dure to complete.
Before operations on the Model G0911–G0914
can begin, a .RD file must be created using the
included RDWorks design software, and then
either transferred from a flash drive to machine
memory, or sent over a local area network.
While navigating through machine operations, you
will be using push buttons on the control panel
shown in
Figure 39.
Note: For a complete list of CNC laser com-
mands, a Command Tree diagram is located in
SECTION 10: APPENDIX on Page 95.
Transferring Artwork