Model G0849 (Mfd. Since 01/19)
-39-
SECTION 7: MAINTENANCE
Removing/Replacing
Collection Bag
Remove and replace the collection bag when it
is about
3
⁄
4
full. If the bag gets overfilled, the dust
will be sucked into the intake barrel and passed
through to the canister filter and filter bag. Avoid
allowing this to happen, as it may reduce filter life.
IMPORTANT: To contain wood dust and minimize
exposure risk, firmly tie bag closed.
How quickly the collection bag will fill up and
require replacement is based on the type of work
being done at the time:
•
Fine dust from a sander or table saw will
slowly fill the bag.
•
Curly shavings from a planer or jointer will
quickly fill the bag.
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To maintain a low risk of injury and proper
machine operation, if you ever observe any of the
items below, shut down the machine immediately
and fix the problem before continuing operations:
•
Loose mounting bolts.
•
Damaged filter canister, cleaning brush com-
ponents, or collection bags.
•
Worn or damaged wires.
•
Suction leaks.
•
Any other unsafe condition.
Monthly Check
•
Clean/vacuum dust buildup off machine body
and motor.
Schedule
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Items Needed Qty
Collection Bag T30326 ...................................... 1
To remove and replace collection bag:
1. DISCONNECT MACHINE FROM POWER!
2. Lift collection drum lock handle, then pull
drum away from machine (see
Figure 73).
Figure 73. Collection bag components.
Collection Drum
Lock Handle
Collection
Drum
Dust exposure created
while using machinery
may cause cancer, birth
defects, or long-term respi-
ratory damage. Always
wear goggles and a NIOSH-
approved respirator when
working with the dust col-
lection bags or canisters.
Summary of Contents for G0849
Page 54: ...52 Model G0849 Mfd Since 01 19...
Page 56: ......