-22-
Model G0849 (Mfd. Since 01/19)
37. With help from an assistant, tilt filter cover
to clear stand base and canister filter, then
lift cover up to impeller housing and secure
using (3)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and (3)
5
⁄
16
"
fender washers (see
Figure 31).
Figure 31. Canister filter cover installed.
Filter
Cover
38. With help from an assistant, place 19" x 39
3
⁄
8
"
filter bag around bottom of canister filter and
secure with clamp (see
Figure 32).
Figure 32. Filter bag installed.
Clamp
Filter
Bag
x 3
41. Attach control panel to right leg brace and
front upper leg using (2)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts
and (2)
5
⁄
16
" fender washers (see
Figure 34).
Figure 34. Control panel attached to right leg
brace.
39. Attach vacuum hose bracket to stand base
using (2)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and (2)
5
⁄
16
"
fender washers (see
Figure 33).
40. Place 1
3
⁄
4
" hose clamp on each end of
1
1
⁄
2
" vacuum hose, then secure to cyclone
funnel port and vacuum hose bracket (see
Figure 33).
Figure 33. Vacuum hose connected to hose
bracket and cyclone funnel port.
Hose
Bracket
Vacuum
Hose
Cyclone
Funnel
Port
x 2
x 2
Summary of Contents for G0849
Page 54: ...52 Model G0849 Mfd Since 01 19...
Page 56: ......
