-36-
Model G0849 (Mfd. Since 01/19)
Using Controls
Operating Control Panel
Refer to
Figure 63 and the following descriptions
to understand the control panel functions.
Figure 63. G0849 dust-collection motor controls
and indicators.
Operating Remote Control
Refer to
Figure 64 and the following descriptions
to understand the remote control functions.
Figure 64. Remote control functions.
Motor
ON
Motor OFF
Cover
Filter
Brush
Cleaning
ON/OFF
ON Button: Turns main motor ON.
OFF Button: Turns main motor OFF.
Power Indicator: Illuminates when machine is
connected to power.
Dust Collection Indicator: Illuminates when
machine is collecting dust during operation.
Filter Brush Cleaning ON/OFF Button: Manually
turns filter brush motor
ON for 1 minute; turns filter
brush motor
OFF when pressed again.
Note: The filter brush cleaning motor starts auto-
matically and runs for 1 minute after 8 hours of
machine use.
Filter Brush Cleaning Indicator: Illuminates
when filter brush motor operates.
During operation, DO NOT start machine,
stop it, then attempt to quickly restart it. If
the magnetic switch does not have enough
time to cool down between startup cycles, it
may overheat and malfunction.
Motor ON Button: Turns main motor ON.
Motor OFF Button: Turns main motor OFF.
Filter Brush Cleaning ON/OFF:
— Press button "C" to manually turn filter
brush cleaning motor
ON to run for 1
minute.
— Press button "C" again to manually turn
filter brush cleaning motor
OFF before 1
minute elapses.
Remote Pairing: Press button "D" to pair remote
control with RF receiver in the control panel if
the remote loses its signal or is replaced (see
Pairing Remote Control on Page 41).
Remote
Pairing
Summary of Contents for G0849
Page 54: ...52 Model G0849 Mfd Since 01 19...
Page 56: ......
