Model G0849 (Mfd. Since 01/19)
-17-
6. Attach left and right leg braces to lower legs
as shown in
Figure 13, and finger-tighten
each one using (4)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and
(4)
5
⁄
16
" fender washers per brace.
Note: Right leg brace has threaded
5
⁄
16
"-18
bolt hole (circled) to mount control panel.
7. Find (2) upper left legs (37" long) without
additional threaded holes on narrow edges
and set aside.
Note: The two upper legs (37" long) with
additional threaded holes on narrow edge are
used in
Steps 9–10.
8. Attach each leg to left leg brace using (2)
5
⁄
16
"-
18 x
3
⁄
4
" hex bolts and (2)
5
⁄
16
" fender washers
(see
Figure 14). Finger-tighten for now.
Figure 14. Upper left legs placed in left leg
brace.
9. Place right front upper leg in right leg brace
so warning labels face outward, as shown in
Figure 15, then attach with (2)
5
⁄
16
"-18 x
3
⁄
4
"
hex bolts and (2)
5
⁄
16
" fender washers. Finger-
tighten for now.
10. Place right rear upper leg with two threaded
10-24 holes facing forward in right leg brace,
then attach using (2)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts
and (2)
5
⁄
16
" fender washers (see
Figure 16).
Finger-tighten for now.
Figure 16. Right rear upper leg installed with
10-24 threaded holes facing forward.
x 2
Right
Rear
Upper
Leg
x 4
Left Leg
Brace
Upper
Left
Legs
Figure 15. Right front upper leg installed with
warning labels facing outward.
x 2
Right
Front
Upper
Leg
Warning Labels
Face Outward
Figure 13. Left and right leg braces installed.
x 8
Left
Leg
Brace
Right Leg
Brace
(w/Bolt Hole)
Threaded
10-24 Holes
Face Forward
Summary of Contents for G0849
Page 54: ...52 Model G0849 Mfd Since 01 19...
Page 56: ......
