-18-
Model G0849 (Mfd. Since 01/19)
Figure 19. Impeller housing attached to legs.
11. Place lifting straps rated for at least 500 lbs.
under impeller housing so that straps sit on
outside of mounting brackets, as shown in
Figure 17.
12. Lift impeller housing enough to clear legs and
base stand (see
Figure 17).
IMPORTANT: To avoid damage when hoist-
ing the impeller housing, make sure the lifting
straps are long enough to avoid contacting
the magnetic switch, junction box, and motor.
13. Place base stand under impeller housing as
shown in
Figure 17.
14. While two assistants align legs below impel-
ler housing, slowly lower it so legs slide into
impeller housing mounting brackets (see
Figure 18).
15. Attach impeller housing to each leg with (2)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and (2)
5
⁄
16
" fender
washers (see
Figure 19).
Lifting
Strap
Lifting
Strap
Legs &
Base
Stand
Figure 18. Impeller housing lowered onto legs.
Impeller
Housing
Mounting
Brackets
Figure 17. Lifting strap placement for impeller
housing installation.
Lifting
Strap
Lifting
Strap
Legs &
Base
Stand
FRONT
Impeller
Housing
Mounting
Brackets
Motor &
Magnetic Switch
x 8
Machine is top heavy. DO NOT work under
any load without a secondary support sys-
tem. To keep machine stable, DO NOT
remove lifting equipment until directed to
do so.
Summary of Contents for G0849
Page 54: ...52 Model G0849 Mfd Since 01 19...
Page 56: ......
