Grizzly G0827, Owner'S Manual

Page: 39 / 92

Model G0827 (Mfd. Since 11/17)
-37-
Setting Horizontal Spindle Speed
Use the chart below (see
Figure 48) or the one
on the rear column cover when setting the spindle
speed. With the spindle completely stopped, posi-
tion the range knob and spindle speed knobs (see
Figure 49), as indicated by the spindle speed
chart, to set the desired spindle RPM.
Note: If necessary, rotate the spindle a little by
hand to mesh the gears when changing speeds.
Setting Vertical Spindle Speed
Use the charts below (see
Figure 45) or those on
the headstock when setting the spindle speed.
With the spindle completely stopped, position the
high/low range selector (see
Figure 46) and spin-
dle speed selectors (see
Figure 47) as indicated
by the spindle speed chart to set the desired
spindle RPM. Position
I
on the range selector is
low speed range; position
II
is high speed range.
Note: If necessary, rotate the spindle a little by
hand to mesh the gears when changing speeds.
Low Range (
I
)
High Range (
II
)
Spindle
Speed
Selectors
High/Low
Range
Selector
Figure 45. Vertical spindle speed charts.
C
I
II
III
C D D
48
72
96
132 324
456
612 240
180
816
1140
1560
B A
Spindle Speed Knobs Range
Knob
Figure 48. Horizontal spindle speed chart.
Figure 49. Location of horizontal spindle speed
and range knobs.
Range Knob
Spindle Speed Knobs
Figure 47. Location of spindle speed selectors.
Spindle Speed Selectors
Figure 46. Location of high/low range selector.
High
Range
(
II
)
Low Range
(
I
)
High/Low
Range
Selector