Grizzly G0699, Owner'S Manual, Page: 46 / 108

-44-
Model G0699 (Mfd. Since 5/15)
Safety Precautions
Your safety is important. The items below are
intended to supplement the
SAFETY section in
the front of the manual. But remember, no safety
list can cover every situation. The operator is ulti-
mately responsible for their own safety, as well as
the safety of bystanders. Every cutting operation
is uniquely different and may require safety equip-
ment or safety procedures not mentioned in this
manual.
Please follow these safety precautions EVERY
time you use your saw:
• Stand to the side of the blade line-of-cut
when performing a cutting operation.
• Turn OFF the saw and allow the blade to
come to a complete stop before removing the
cut-off piece.
• Make sure that the riving knife is always
aligned with the main blade before cutting!
• Always keep the blade guard properly
installed.
• Carefully plan each cutting operation to avoid
injuries.
• When you release the sliding table lock,
make sure that the lock lever is positioned so
that it will not lock the table during a cut.
Machine Controls
Review the control descriptions and Figures
72–76 to better understand their functions and
how to use them.
Main Blade ON/OFF Buttons: Starts and stops
the main saw blade.
Scoring Blade ON/OFF Buttons: Starts and
stops the scoring blade.
STOP Button: Cuts power to both motors.
Blade Tilt Handwheel & Lock Knob: Handwheel
tilts the blades from 0° to 45°. The lock knob
secures the handwheel to prevent it from moving
during operation.
Blade Tilt Scale: Displays the degree of blade
tilt.
Figure 73. Blade tilt controls.
Tilt Handwheel
& Lock Knob
Tilt Scale
Figure 72. Power controls.
Main Blade
ON/OFF Buttons
Scoring Blade
ON/OFF Buttons
STOP Button