Grizzly G0699, Owner'S Manual, Page: 19 / 108

Model G0699 (Mfd. Since 5/15)
-17-
Inventory
Crate 1 (Figure 8) Qty
A. Forward Extension Wing ............................ 1
B. Rear Extension Wing ................................. 1
C. Crosscut Table ........................................... 1
D. Crosscut Fence .......................................... 1
E. Crosscut Table Brace ................................. 1
F. Rip Fence Rail w/Fasteners ....................... 1
G. Rip Fence Scale ......................................... 1
H. Rip Fence ................................................... 1
I. Rip Fence Body Assembly ......................... 1
J. Crosscut Fence Flip Stops ......................... 2
K. End Shoe Assembly ................................... 1
L. Push Stick .................................................. 1
M. Riving Knife ................................................ 1
N. Hold-Down Assembly ................................. 1
O. Blade Guard Cover (Wide) ......................... 1
P. Blade Guard Cover (Straight) ..................... 1
Q. Blade Guard Dust Hood ............................. 1
R. Blade Guard Connection Plate Assembly .. 1
S. Arm Support Pedestal ................................ 1
T. Arm Support Base ...................................... 1
U. Upper Support Arm .................................... 1
V. Dust Hose 3" ............................................. 1
W. Dust Port Connection 3" ............................ 1
X. Tool Box (Not Shown) ................................. 1
— Scoring Arbor Wrench ............................ 1
—Combo Wrench 17/19mm ....................... 1
— Wrench 30mm ........................................ 1
— T-Handle Wrench 8mm ........................... 1
Figure 8. Crate 1 inventory.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.