Grizzly G0699, Owner'S Manual, Page: 24 / 108

-22-
Model G0699 (Mfd. Since 5/15)
Lifting & Placing
To lift and move the machine:
1. After removing the shipping crate from the
pallet, move the smaller components and
boxes to a safe area.
2. Position the forklift forks completely under the
cabinet, as illustrated in
Figure 12.
Figure 12. Example of lifting the table saw
assembly.
3. With the help of additional people to steady
the load, lift the machine enough to clear the
pallet and any floor obstacles, then move it to
its permanent location.
Assembly & Setup
To assemble the sliding table saw:
1. Use the elevation handwheel on the right side
of the cabinet to raise the main blade arbor
all the way up, then open the blade safety
cover to expose the blade arbors, as shown
in
Figure 13.
Figure 13. Blade arbors exposed.
Scoring Blade
T-Handle
Wrench
Main
Blade
Arbor
HEAVY LIFT!
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
You must successfully complete the assem-
bly and setup of this saw as instructed
below before connecting the machine to
power. Otherwise, the saw will not operate
safely and could cause serious personal
injury or machine damage.
Before proceeding with the next steps, wear
leather gloves to protect your hands when
handling the saw and scoring blades.