•
INTENSITY – it define the progression of traction
control. If you want to quickly stop the spinning
(strong effect of traction control) use high values (12
to 20). If you want a soft effect of traction control use
a small values (1 to 8).
•
LEAN CONTROL – it define the sensitive of
traction control in the middle of the corner (when
your bike is fully leaned). Use high values (12 to 20) if
you want a high sensitive in the middle of corner.
Use small values (1 to 8) if you want to reduce the
sensitive in the middle of corner. NOTE: This
parameter is effective only if your system is
connected to the IMU (inertial platform).
controllo di trazione.
•
INTENSITY – stabilisce la progressione del
controllo di trazione. Usa valori alti (12-20) se vuoi
fermare velocemente il pattinamento. Usa valori
piccoli (3-8) se vuoi ottenere un effetto dolce dal
controllo di trazione.
•
LEAN CONTROL – definisce la sensibilità del
controllo di trazione a centro curva (quando la
moto è completamente inclinata. Usa valori alti
(12-20) per avere una grande sensibilità alle
perdite di trazione a centro curva. Usa valori bassi
(2-8) per ridurre la sensibilità a centro curva.
NOTA: Questo parametro funziona solo se sei
collegato alla piattaforma inerziale (IMU).
10.2 Anti wheelie [AW]
•
SENSITIVE – it define the sensitive of anti wheelie
control. Increase its value if you want to cut the
power as soon the tire lift from the ground. Reduce
its value if you want permit more wheelie.
•
DURATION – The strategy of anti wheelie cut the
power every time the front tyre lift from the ground.
DURATION define the duration (in centitimes of
seconds) of cut. Increase its value to make it longer.
Reduce its value to make it shorter
10.2 Anti wheelie [AW]
•
SENSITIVE – definisce la sensibilità dell’anti
impennamento. Aumenta il valore per ridurre la
potenza appena la ruota si solleva dal terreno.
Riduci il valore se vuoi permettere un certo
impennamento prima di tagliare la potenza.
•
DURATION – L’anti impennamento taglia la
potenza ogni volta che la ruota si solleva.
DURATION definisce la durata (in centesimi di
secondo) della riduzione di potenza. Aumenta il