Climber Series 7/ Translation of the original instructions
7
For the engine and the battery, the provisions of the relative manufacturers apply.
RECOMMENDED LIST OF SPARE PARTS TO BE KEPT IN STORE
2 x mowing blades
2 x blade screws
2 x blade screw nuts
1 x set of belts
1 x air filter for engine
1 x oil filter for engine
1 x throttle cable
2 x wiring system fuses
TECHNICAL SPECIFICATIONS
ENGINE:
7.13 - B&S VANGUARD 13,5 hp (10 kW) OHV, single-cylinder, internal combustion, 4-stroke, AVS synchro-
balanced series.
7.16 - B&S VANGUARD OHV 16 hp (13 kW), twin-cylinder, internal combustion, 4-stroke series.
7.21 - B&S VANGUARD OHV 21 hp (15.5 kW), twin-cylinder, internal combustion, 4-stroke series.
HOURLY CONSUMPTION:
3 lt/h – 7.13 / 3.5 lt/h – 7.16 / 3.8 lt/h – 7.21.
STARTING SYSTEM:
electric, with battery 12V.
GEARBOX:
hydrostatic transmission.
DIFFERENTIAL:
with locking device.
CLUTCH:
for PTO with electromagnetic clutch.
GROUND SPEED:
from 0 to 9 km/h with continuous variation and reverse from 0 to 4 km/h.
TYRES front:
13x5.00-6;
rear:
16x 6.50-8.
BRAKE:
front emergency brake; rear parking brake.
OPERATOR SEAT:
sprung und adjustable, fitted with roll bar.
CUTTING DECK:
side/rear discharge.
CUTTING SYSTEM:
single rotating blade.
CUTTING WIDTH:
850 mm.
BLADE SPEED:
76 m/sec.
CUTTING HEIGTH:
from 35 mm to 85 mm, 6 cutting positions and 1 for travelling.
WORK CAPACITY:
5000
m
2
/h (indicative) – 7.13
/
6.000 m
2
/h (indicative) – 7.16 & 7.21
STEERING RADIUS:
450 mm.
FUEL TANK:
7 lt,
RESERVE:
1 lt.
TOWING BAR:
as a standard.
SIZES:
W950xL1895xH975mm.
WEIGHT:
225 kg – 7.13 /
235 kg – 7.16 /
245 kg – 7.21.
INSTRUCTIONS FOR USE
PUTTING THE MACHINE INTO SERVICE
1) Check that the machine has not been damaged in transit.
2) Check the oil levels of the engine, hydrostatic transmission and final drive.
3) Check the tyre pressure:
4) 1 BAR front wheels 13 x 5.00-6
5) 1.2 BAR rear wheels 16 x 6.50-8.
6) Check the battery voltage; it must be at least 12 Volts. Charge if necessary.
7) IMPORTANT!!! During assembly take care not to reverse the polarity of the battery.
8) Fix the steering wheel taking care the key is properly inserted and the screw is tight enough
(tightening torque 2 KgF.m [20 N.m]).
9) Fit the muffler, the rear bumper and the roll bar.
Summary of Contents for Climber CL 7.13
Page 46: ...Fig 9 Fig 10 Fig 11 Fig 12 Fig 13 Fig 14 3 4 Fig 16 Fig 15...
Page 48: ...Fig 22 Fig 23 Fig 24 Fig 25 Fig 26 Fig 27 B A NEUTRAL IN USE A A B...
Page 51: ......
Page 52: ......