![background image](http://html1.mh-extra.com/html/gregster/ergo-speedracer/ergo-speedracer_user-manual_2264254019.webp)
36
37
ENGLISH
CAUTION - RISK OF INJURY
• Do not use the product if it is damaged or defective. In this case, contact a
professional workshop or our service center.
• Always verify that the product is in impeccable condition before use. Defective
components must be replaced immediately as failure to do so may impair the
functioning and safety of the unit.
• Make sure that no more than one person uses the product at a time.
• Always use the product on a horizontal, level, nonslip and solid surface. Never use
the product near water and make sure there is a safety clearance of at least 1 meter
on all sides of the product.
• Do not put any objects into any openings on the product.
ELECTRIC SECURITY
• Before connecting the device to the mains, make sure the current and mains
voltage match the specifications on the rating label.
• Never use the device if damaged! Disconnect the device from the mains and
contact your customer service, if the device has been damaged in any way.
• Risk of electric shock! Never attempt to repair the device by yourself. Have any
faults repaired by qualified experts only.
• Avoid damaging the cable by jamming, bending or rubbing it on sharp edges. Keep
it away from hot surfaces and open flames.
• Guide the cable in such a way that it cannot be pulled down or tripped over
accidentally.
• When using an extension cable, it must be suitable for the respective power used.
• Warning! Never immerse electric parts of the device in water or other liquids during
cleaning or use.
• Never operate the device with wet hands or when standing on a wet floor. Never
touch the mains plug with wet or moist hands.
• Never open the housing. Do not insert any objects into the housing.
• The use of accessories not explicitly recommended by the manufacturer could
cause injuries and damage. Only use original accessories.
• Keep the device away from hot surfaces and open flames. Always use the device
on a flat, stable, clean and dry surface. Protect the device against extreme heat,
dust, direct sunlight, moisture, and dripping and splashing water.
• Do not place any heavy objects on the device. Do not place any objects with open
flames (e.g. candles) on or next to the device. Do not place any objects filled with
water (e.g. vases) on the device.
• This device is not intended to be used by persons (including children) with reduced
physical, sensory or mental abilities or lack of experience and / or lack of knowledge
unless they are supervised by a person responsible for their safety or have received
instructions on how to use the device.
• Children must be supervised, so they do not play with the device.
• Check the power adapter and connection cable before each use. If the connection
cable of this device is damaged, it must be replaced by the manufacturer, its
customer service agent or any other similarly qualified person, in order to avoid
hazards.
• When disconnecting the power adapter from the wall socket, do not pull the cable.
Do not wind the cable around the product.
• Connect the adapter to a readily accessible wall socket in order to be able
to disconnect the device from the mains immediately in case of emergency.
Disconnect the adapter from the wall socket to fully switch off the device. Use the
adapter as disconnecting device.
• Disconnect the adapter before each cleaning and if not using the device for a longer
period of time.
• Only use the adapter included in the delivery scope.
CAUTION - PRODUCT DAMAGE
• Do not alter the product in any way and use only original replacement parts. Have
all repairs carried out in a professional workshop or from similarly qualified persons
- improper repairs can lead to serious risks for the user. Use the product for the
intended purposes as described in this user manual only.
• Shield the product from spraying water, moisture, high temperatures and direct
sunlight.
INFORMATION ON ASSEMBLY
• Assembly of the product must be carried out carefully by an adult person. Ask for
the assistance of another, technically-skilled person in case of doubt.
• Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
• Remove all packaging materials and place all individual components on a free
surface. This will give you a good overview and simplify assembly. Shield the
assembly surface from filth and scratching by laying down suitable padding.
• Check the components against the components list to make sure all are present. Do
not dispose of all packaging materials until assembly is completed.
• Please note that there is always a risk of injury when using tools to carry out manual
tasks. Therefore, please exercise caution when assembling this product.
GRG-SRP-3000-IM-DE+GB+FR-V1.indb 36-37
27/6/2016 3:01 PM