GreenTec Scorpion 330-4 S, Handbook

Page: 58 / 95

58
Scorpion 4, 6 and 8
Attaching the machine to the vehicle
The vehicle and the machine must be operated from the
driver's seat. Never allow any other persons to stand on or by the lift system
during operation. Danger of getting crushed
.
1.
Carefully back up the vehicle to the boom Mower and grab the lift ball joints with
the hooks of the lift
.
2.
The top part of the 4-point mounting system must now be adjusted so that the
K80 ball joint connects with the ball
:
a.
Start by adjusting the side direction of the top bar 1
Then adjust the length of top bar 2
Fejl! Henvisningskilde ikke fundet.
b.
Adjust until it fits directly down over the ball
c.
Lock the mounting with rivet and split
d.
The lock must be adjusted with a permissible slack of max. 0,5 mm
, see
Figure 23
Checking and readjusting the machine attachment on the vehicle
Lift the tool from the ground and make sure that the boom mower is hanging straight
and vertically on the vehicle. If necessary, adjust top bar 2 so the boom mower hangs
vertically - or top bar 1 to shift the mower to the side so it hangs from the middle of the
vehicle.
How to readjust:
1. For the top bars to be adjusted, the load on the bars must be removed:
Figure 23
– Slack adjustment of pilot ball joints