GreenTec Scorpion 330-4 S, Handbook

Page: 30 / 95

30
Scorpion 4, 6 and 8
The scope of application and limitations of the boom mower
The boom mower can be mounted on many different vehicles - larger mini loaders,
telehandlers, tractors, etc. GreenTec produces many different loading tool brackets for
the many different vehicles. From the ‘quick hitch’ of the mini loaders/front end loaders
to the 3-point mounting system of the tractors (category 1,2 or 3). Less adjustment
should be expected, for example, like fitting the stop block of the bracket on the mini
loader/front end loader to make the mounting of the lower rivet easier
.
When using the machine in any other way than described in this
section, as well as the section
Fejl! Henvisningskilde ikke fundet. (g) , GreenTec
is not
liable for any damage as a result - The risk lies solely with the user
.
The owner/operational manager is responsible for compliance with the
following rules
:
•
That the stability of the loading vehicle is sufficient (see the section on stability
).
•
The vehicle on which the machine is mounted must meet the requirements for
machinery approved for use in agricultural sector
.
•
The machine must never be used for the transport of persons, animals or other
equipment than described in this manual
.
•
Never use the machine as a "crane" or as any kind of lifting equipment.
•
All limit values must under no circumstances be exceeded. (safety distances,
pressure, flow, rev/min., etc
.).
•
Never use the machine without safety guardings
.
The attachment tools of the boom mower (n)
The machine is designed for the mounting of GreenTec attachment tools
.
There are
many different GreenTec tools available in many different sizes.
See which tools fit your Scorpion in the
Specification section.
All GreenTec's tools carry a sticker with the GreenTec logo and the name of the tool.
‘Name’ and ‘manufacturer’ will always appear on the manufacturer's plate (see
example of manufacturer's plate
Figure 4),
which is attached to all GreenTec tools. In
addition to that, the tools are characterized by the attachment bracket that joins the
tool with the arm. The attachment bracket is available for bolt-on installation with 4- 5
or 6 bolts (depending on size), or with ‘quick hitch’, where the "male” part is mounted
on the arm, while the "female” part is mounted on the tools.
After that, the tool can be lifted with the arm. The driver must secure the mounting with
1 single bolt and connect the hydraulic outlets
.
The machine's reliability can only be guaranteed if it is used in accordance with the
intended use
.