16
Scorpion 4, 6 and 8
Safety instructions for adjustment, maintenance, and inspection work (s)
•
The operator must ensure that all maintenance, inspection, and installation work is
carried out by authorized and qualified professional personnel who, after carefully
reading the instruction manual, have sufficient knowledge
•
Maintenance, inspection, and assembly work must only be carried out when
hydraulics is disconnected.
•
For maintenance work under the tool carrier, secure with appropriate support
elements.
•
When replacing attachment tools, check the hydraulic system for residual pressure
- any remaining residual pressure is reduced to zero (0 bar).
•
Use only suitable maintenance and adjustment tools and wear safety work gloves,
safety shoes and safety goggles.
•
Handle the hydraulic oil and grease in compliance with regulations. Be familiarized
with the safety data sheets.
•
Immediately after the completion of work, all safety devices must be installed and
reactivated.
Summary of Contents for Scorpion 330-4 S
Page 1: ...1 Edition 2020 ...
Page 2: ......
Page 26: ...26 Scorpion 4 6 and 8 Hydraulic diagram Scorpion 4 e ...
Page 95: ......