GreenTec Scorpion 330-4 S, Handbook, Page: 42 / 95

42
Scorpion 4, 6 and 8
Schwimmstellung des Werkzeugs
fddf
Float position tool
Must be activated on all the mounted tools that
move along the ground, following its contours
.
Mode of operation
The cutting head will tilt freely when you
connect the tilting cylinder directly to the tank.
The cutting head will therefore follow the
contours of the ground freely.
Although the float position
of the tool is activated, tilting of the head can be
activated by the left scroll button on the joystick
(Scorpion 6-8) or the two push buttons on the
joystick (Scorpion 4).
Float position activation
Press the button once, the button diode lights
up. Head flow is now activated
.
Press once more, the button diode turns off.
Flow is now deactivated
.
Float position must be
deactivated before the machine is folded up for
transportation
!
Joystick Scorpion 6 + 8
Joystick Scorpion 4
Tilt head
Tilt head