Hedge Cutter RC 162 35
Loosen the two bolts
Raise the cap
Check belt tension at the middle of the belt with
belt measurer 200155.0
Loosen counter nut and adjust belts
Recommended tools:
•
Belt measurer
”Optikrik II”
•
1 pc. 13 mm Ring/Fork spanner
•
2 pc. 19 mm Ring/Fork spanner
•
Work gloves
•
Safety shoes
Procedure:
•
Loosen the two cap bolts and raise the cap.
•
Check the Nm belt setting with Belt measurer
”Optikrik II” 200155.0
•
Adjust the belt if necessary.
•
Turn the rotors a couple of times and recheck with the belt measurer.
•
Close the cap and retighten the two bolts.
If you have any questions please contact the Green-Tec Service Department and we
will help out with advice and supply the correct measuring tool.
Summary of Contents for RC 162
