GreenTec RC 162, Handbook

Page: 21 / 52

Hedge Cutter RC 162 21
Never use the tool on an unstable or non suitable vehicle
Mounting to an arm system or similar:
Tools can be mounted to the arm system with a Quickshift or
with bolts.
GreenTec RC 162 is specially designed for the Spearhead
arm system program.
RC 162 is a tool designed to be mounted on tractors via a
suitable armsystem.
The RC 162 has a work width of approximately 160 cm. Total
wieght of the unit is150 kg. If necessary, ballast can be
mounted on the vehicle or the arm system to ensure stability
and balance during any work or working conditions.
Be careful with rotating knives. Danger of cuts! Danger of
getting caught!
MOUNTING / DISMOUNTING RC 162:
Mounting the tool must be done at a plane and safe surface.
Always pay close attention when mounting the tool to the
machine; make sure that no persons are within range of the
saw/blades, as these can cause injuries even when
stationary. For safety reasons the saw/blade must always be
fitted with the safety caps, and these should only be removed
when starting the work. Always wear work glowes.
Never use the machine with broken or missing knives
The tool must never be operated without the rubber
curtain.