background image

®

Quick Start Guide for BG-PH2250 Petrol Hedge Trimmer

1. Overview

PLEASE READ ALL INSTRUCTIONS BEFORE USING THE PETROL HEDGE TRIMMER

1.     Cutting blade
2.     Cutting blade safety cover
3.     Safety plate
4.     Front handle
5.     Choke lever
6.     ON/OFF switch
7.     Lubrication nipple
8.     Gears
9.     Fuel pump (primer)

10.    Air filter cover

11.     Starter handle
12.    Rear handle
13.    Throttle lever “release”
14.    Throttle lever
15.    Silencer cover
16.    Tank for fuel mixture
17.    Spark plug boot
18.    Spark plug wrench
19.    Combined oil/petrol cylinder
20.   Cutter rail cover

1

11

4

3

2

1

13

6

16

17 5 10 9

14

15

7 8

12

6

7

8

9

2

19

18

3

14

20

6

13

4

5

5

A

9

Summary of Contents for BG-PH2250

Page 1: ... handle 5 Choke lever 6 ON OFF switch 7 Lubrication nipple 8 Gears 9 Fuel pump primer 10 Air filter cover 11 Starter handle 12 Rear handle 13 Throttle lever release 14 Throttle lever 15 Silencer cover 16 Tank for fuel mixture 17 Spark plug boot 18 Spark plug wrench 19 Combined oil petrol cylinder 20 Cutter rail cover 1 11 4 3 2 1 13 6 16 17 5 10 9 14 15 7 8 12 6 7 8 9 2 19 18 3 14 20 6 13 4 5 5 A ...

Page 2: ...ch has been kept for longer than 90 days Please note Do not use 2 stroke oil with a recommended mixing ration of 100 1 If inadequate lubrication causes engine damage the manufacturer s engine warranty will be voided Please note Only use containers designed and approved for the purpose to transport and store fuel Pour the correct quantities of petrol and 2 stroke oil into the mixing bottle see scal...

Page 3: ...e than 15 20 minutes 1 Set the machine down on a hard level surface 2 Switch the ON OFF switch to I 3 Hold the machine by the front handle in your right hand and pull the starter cable up to the first resistance point approx 10 cm Then tug sharply on the starter cable The machine should start after 1 2 tugs If the machine does not start after 6 pulls repeat steps 1 7 of the procedure for starting ...

Page 4: ...led air filter Incorrect carburetor setting Incorrect electrode gap on the spark plug Incorrect carburetor setting Incorrect fuel mix Incorrect carburetor setting Follow the instructions for starting Clean the spark plug or replace it with a new one Contact an authorized customer service outlet Set choke lever to Clean the air filter Contact an authorized customer service outlet Clean the spark pl...

Reviews: