GreenTec RC 162, Handbook

Page: 19 / 52

Hedge Cutter RC 162 19
SPECIFIKATIONS:
•
Hydraulic driven 40/**50 l/min.
•
Work width approx. 1.6 m.
•
Weight without extra equipment 150 kg.
•
3 rotors with a double knife system (3+3 knives).
•
”Powerbelt” belt system.
•
Mechanically adjustable angle of the tool.
•
Hardox steel
•
Support wheels 250 mm
•
”Branch Raiser”
Hedge Cutter RC 162
Oil amount 40/**50 l/min
Hydraulic Motor 15/**21 ccm Pistonmotor with anticavitation. Reversible.
Relief Valve in Motor 180 bar non adjustable
Power needed 13,3 KW / 18,3 Horsepower
Tool speed 2500
– 2600/**2300 (1:1 gearing) rpm
Max. Oil pressure 280 bar / 28 MPa
Max. Leak oil pressure 0-1,5 bar / 0-0,15 MPa
Max. Return pressure 15 bar / 1,5 MPa
Oil filterering standard 10 micron
Recommended
Hydraulic oil
(HLP 46 cold / tempered climate) (HLP 68 warm climate)
Lended for Hedges
Branch sizes 0-40 mm
Allowed angles From -15
0
to +90°
Field of application Vertical and horizontal
Belt tension New belt 1100 Nm Used belt 900 Nm
Work width 160 cm
Total height 52 cm
Total width 163 cm
Total lenght 97 cm
Weight 150 kg
Knife mounting lower 360
0
rotating
Knife mounting upper 110
0
rotating
Tension knife bolts 95 Nm
Work season Spring till Fall*
*When the sap disappears from the branches the end result will become
more ”frayed”.
When operating off growth season the knives will wear out faster
.
**Machine after 15/6 2018