GreenTec RC 162, Handbook

Page: 9 / 52

Hedge Cutter RC 162 9
GENERAL INFORMATION
Read this manual before fitting or operating the machine or accessory. Whenever any
doubt exists contact your local dealer or the GreenTec Service Department for
assistance.
Only use ‘Genuine GreenTec Parts’ on GreenTec machinery and
equipment
.
DEFINITIONS:
The following definitions apply throughout this manual;
DANGER: Alerts to a hazardous situation which will result in death or serious injury if
not observed carefully.
WARNING: Alerts to a hazardous situation which could result in death or serious injury
if not observed carefully.
CAUTION: Alerts to a hazardous situation which could result in damage to the
machine and/or equipment if not observed carefully.
NOTICE: Specific or general information considered important or useful to emphasize.
LEFT HAND (LH) & RIGHT HAND (RH): These terms are applicable to the machine
when fitted to the tractor and viewed from the rear; these terms also apply to tractor
references.
SERIAL PLATE
All machines are equipped with a serial number plate containing important information
relating to the machine including a unique serial number used for identification
purposes.
Note: Images in this manual are provided for instruction and informational purposes
only and may not show components in their entirety. In certain instances images may
appear different to the actual machine; where this occurs the general procedure will be
basically the same.