Pellet burner GP 45 IV 8
3
TECHNICAL DATA OF AUTOMATED WOOD PELLET BURNER FROM SERIES
“GP 45 IV ”
Heating-technical parameters of automated pellet burner from series “GP 45 IV” operating
with wood pellets are presented in Table 3.1.
Table 3.1. Heating-technical parameters of automated pellet burner from series “GP 45 IV”
operating with wood pellets.
Parameter
Dimension
Value
Burner model
-
GP 45 IV
Nominal heating output
kW
45
Heating output adjustment range
kW
14-45
Used fuel
-
Wood pellets, dry
cherry nuts
Wood pellets category, according to EN 14961-2
-
ENplus-A1
Used pellets categories (according to the burner
manufacturing company classification)
-
A, AB, B
Wood pellets consumption at nominal heating output
kg/h
9.6
kg/h
75-90
Needed air quantity for efficient burning process
m
3
/h
70-84
Average wood pellet consumption in the heating
installation
kg/h
5.0-7.0
Wastes from fuel combustion
Ash
The quantity
depends on the fuel
ash content and the
operation mode
The automated pellet burner from series “GP” is designated for utilization of wood
pellets that comply with the presented classifications, according to standard EN
14961-2, category ENplus-
А
1 and to the pellets categorization developed by the
burner manufacturing company. As an exception it is allowed to utilize non-
complying to the specification wood pellets, only for a short period of time (in a
few hours), mostly with higher ash content, which will require more frequent
cleaning of the ash gathered on the burner’s fire-grate and over the appliance
heat exchanging surfaces, to which the burner is mounted.
The presented values for average wood pellets consumption in the heating
installation refer to buildings and premises with good heat isolation and sealed
window frames.