Pellet burner GP 45 IV 32
Figure 6.6. The display shows information about the burner operation mode – transition
mode – transition from ignition to burning process stabilization in minimum heating output
operation mode.
„TRANS.:10kW „ – shows that the burner is in transition phase for stabilization of
the burning process, with heating output 10 kW.
After completing the transition mode the burner transits to operation mode as presented on
Figure 6.7.
Figure 6.7. The display shows information about the burner heating output level in maximum
output mode.
„COMBUST 5 – 50kW ” – shows the burner heating output level (in this case
5
th
level and the burner heating output is 50 kW);
„72
о
”- indicates the water temperature,
o
C;
“FC: 98%” – indicates the light intensity registered by the photo-sensor, %.
S
_
+
ESC
COMBUST 5 50kW
72
o
FC: 98%
S
_
+
ESC
TRANS. : 10kW
32
o
FC: 65%