Gree U-Match 5 Series, Manual

Page: 110 / 224

GREE U-Match 5 SERIES UNIT SERVICE MANUAL
107
Removal of front panel
Note: Before removing the front panel, make sure power is cut off.
Step Picture Work instruction
3. Remove the front side plate.

Unscrew the screws of the
front side plate with a
screwdriver.
4. Remove the front panel.

Unscrew the screws that
connect the front panel to
the middle insulating board
and screws around the front
panel.
5. Remove the right side plate.

Unscrew the screws that
connect the right side plate
to the electric box and the
screws around the right side
plate.
6. Install the right side plate

Screw up the screws around
the right side plate. Be
careful to handle well the
clasps at the bottom of the
right side plate.
7. Install the front panel.

Install the front panel by
mounting on 6 clasps on its
both sides. Please note that
there is one screw on the
lower right side.