Gree U-Match 5 Series, Manual

Page: 147 / 224

GREE U-Match 5 SERIES UNIT SERVICE MANUAL
144
4.5.2.2 Duct Type Unit
Removal of fan and motor
Note: Before removing the motor, make sure power is cut off.
Step Picture Work instruction
1. Remove the cover of
electric box.

Turn off the power supply of indoor
unit. Use a screwdriver to remove
the cover of electric box.
Disconnect the motor wire inside
the electric box.
2. Remove air return
plate, the longitudinal
component and air
return frame.

Use a hex wrench to loosen the
screws of fan.

Order of removal: air return plate,
air return frame, longitudinal
component, cross beam
3. Remove the upper
volute.

Loosen the screws of upper volute
and then pull out the upper volute.
4. Remove the lower
volute.

Loosen the screws of lower volute
and then rotate in the direction
shown by the arrow.
5. Remove the motor and
fan.

Use a screwdriver to remove the
clamping band of motor. Then
remove the motor and fan as a
whole.
6. Replace the motor.

Remove the motor from the motor
support.

Use a hex wrench to loosen the
screws of fan.

Remove the fan from the motor.

Replace with a new motor.