Gree R410A, Manual

Page: 26 / 90

continuously press “ ∨ ∨ ”button twice to decrease temperature to 12°C (when Save function is activated, the
temperature in Dry mode can’t be adjusted to 12°C and the setting range is “l owest temperature in Save mode” ~
30°C).
Note:
①
Under Auto mode or Out function is activated, the setting temperature can not be adjusted by pressing
“ ∧ ∧ ”
or
“ ∨ ∨ ”
②
When the wired controller is connected with a Fresh Air Indoor Unit, setting temperature wo
n’t be
displayed and can’t be adjusted via “ ∧ ∧ ”
or
“ ∨ ∨ ”
button. The air outlet temperature in cooling or heating can only be
set in the parameter setting status.
4
）
Fan Speed Setting
Under On status, pressing FAN button can set fan speed circularly as:
Note: Under the DRY mode, the fan will be kept running at the low speed and the fan speed isn't adjustable
5
）
Timer setting
The wired controller is equipped with two kinds of timer: general timer and clock timer. General timer is
factory defaulted setting. Please refer to parameter setting
a. General Timer
Unit On/Off after a desired hour can be set through general timer.
Set Timer: when timer is not set, press TIMER button to enter timer setting and “HOUR” icon is blinking. Press
“ ∧ ∧ ”
or
“ ∨ ∨ ”
button to adjust timer time. Press TIMER button to save the setting and then exit setting.
Cancel Timer: when timer is set, press TIMER button to cancel it.
Timer setting range: 0.5~24h. Pressing
“ ∧ ∧ ”
or
“ ∨ ∨ ”
button increases or decreases timer time by 0.5h; holding
“ ∧ ∧ ”
or
“ ∨ ∨ ”
button increases or decreases timer time by 0.5h every 0.3s.
In unit On status, timer Off setting is shown as follow:
24
for North America
CONTROL
Photovoltaic Direct-driven VRF