Chapter VII Cooling System
Great Wall Baoding Internal Combustion Engine
Manufacturing Company Limited
421
Fig. 7-2-18 Removing the water inlet pipe
Fig. 7-2-19 Removing the thermostat and its cap
Fig. 7-2-20 Removing the thermostat cap and
thermostat shield
Removing the water inlet pipe
①
Loosen the clip used to fasten water inlet pipe, and
remove the water inlet pipe from water inlet of
thermostat cap. See Fig. 7-2-18.
Removing the thermostat cap
②
(1) Remove 2 hexagon flange bolts (M6×20) (used
for fastening the thermostat cap) to the thermostat
chamber in cylinder body.
(2) Remove the thermostat cap from the cylinder
body. See Fig. 7-2-19.
Removing the thermostat assembly
③
Take thermostat and rubber seal ring from the
thermostat cap on the left side of cylinder body as
shown in Fig. 7-2-20.
Removing the thermostat shield
④
Take the thermostat shield from the thermostat
chamber on the left side of cylinder body as shown in
Fig. 7-2-20.
Water inlet
pipe
Cylinder body
Cylinder body
Thermostat cap
Thermostat
Thermostat cap
Thermostat shield
