7
❏
3. If you have not already done so, install the rubber
grommets and eyelets (included in your servo hardware bag)
onto the servo mounting tabs.
❏
4. Use the strings taped inside the aileron servo openings
to pull the servo leads through the wing.
❏
5. Fit the servos into the servo openings and drill 1/16"
[1.6mm] holes through the mounting tabs on the servo cases
into the rails.
❏
6. Thread a servo mounting screw (included with the servo)
into each hole and back it out. Apply a drop of thin CA to each
hole to harden the wood surrounding it. When the CA has
