GRAUPNER mz-24 HOTT, Operating Instruction

Page: 97 / 108

Touch
Touch
Touch
97
Telemetry
Touch
Touch
Touch
Touch
Touch
Touch
Telemetry
11. Airbrake (Airplane)
This mixing is used when the airplane is need to land or descent vertically. Airbrake can be set
by AILE, FLAP and ELEV.
Touch “Airbrake” icon in the function setup page to call the airbrake setup page. The first page is
AILE setup and you may access to FLAP, ELEV and AIRBRAKE DELAY setup page by
touching “NEXT” icon in the top right. Touch “INH” icon in ACT line to switch to “ON” and touch
“ON” in CTL line to call the “Select” message popup. Move the switch or stick or volume with
your choice then that switch or stick or volume is designated as on/ off key and then the key
direction setup page appears. You may select ON or OFF by touching icons. When the key
is moved to the direction of ON, the function is operated. Touch “BACK” icon to the previous
page then touch and activate the values in blue and adjust them with “INC” and “DEC” but-
tons. After the programming setup of FLAP, ELEV and AIRBRAKE DELAY in turn, touch SER-
VO icon on the top right to call SERVO page. You may check the setup value for Airbrake.