GRAUPNER mz-24 HOTT, Operating Instruction

Page: 76 / 108

Touch Touch
Touch
Touch
Touch Touch
Touch
76
1-3 CPY
CPY function is used to copy the preset Q.LINK setup data into another Q.LINK. Touch the
desired entry in “Q.LINK” line to activate in blue. Touch “CPY” icon to call “COPY” message
popup. Touch the entry in TARGET then all entry in TARGET are displayed in turn. Now,
select the desired Q.LINK entry and touch “YES” icon then the preset data is saved into the
selected Q.LINK entry and return to Q.LINK setup page.
1-4 DEL
It is used to delete the unused Q.LINK. Touch the entry in Q.LINIK line that you want to delete to
activate in blue and touch “DEL” icon. Now, the selected Q.LINK entry is deleted in Q.LINK list
2. D/R, EXP
D/R function is used to adjust Servo travel amount that is connected to all channels including
aileron, elevator and rudder channels. You can assign them to numerous switches and sticks
EXP function is used to set D/R function to aileron, elevator and rudder channels and adjust
the sensitivity of natural position of every channel. Positive Exponential reduces the control
sensitivity of neutral position for more precise control and negative exponential increase the
control sensitivity of neutral position D/R, EXP function can be operated with the assigned
switch or connected to Q.LINK for purpose In the function page, touch “D/R, EXP” icon to call
D/R, EXP setup page. Touch D/R or EXP icon to activate in blue and perform D/R or EXP
programming setup with “INC” and “DEC”.
1-5 NEXT
If you touch “NEXT” icon, you may call the next page