GRAUPNER mz-24 HOTT, Operating Instruction

Page: 90 / 108

Telemetry
Touch
Touch
Touch
Touch
Touch
Touch Touch
90
Telemetry
Telemetry
Touch Touch
9. Flap MIX
It consists of 4 mixing types, “FLAP”, ”AILE>>FLAP”, “ELEV>>FLAP”, and “FLAP>>ELEV”.
9-1. FLAP
This function is used to adjust the flap angle to increase or decrease airplane lift
To setup the flap function, you need to designate on/off control key such as switch, stick and
volume. When you move the control key, the flap function is operated.
Touch “CH SET” in BASE page to call “CH SET” setup page. Touch “NONE” icon in FLAP 1
line to pop up “Select” message. Move the control key with your choice then that control key
is designated as on/ off key. Now, touch “SERVO” icon in the right top to call the servo view
page. The default value, 30%, for the travel amount of servo is displayed in the graph and
this function value can be adjusted. To adjust the function value, touch “Flap MIX” icon in the
function page to call Flap Mix page and touch “>>” icon in SET line to call the flap setup page.
Touch and activate the function value to adjust with INC and DEC buttons. Now, touch “SER-
VO” icon again to call the servo view page then you may check the setup value in this page.
After setup, touch “BACK” icon to return to Flap MIX page.