GRAUPNER mz-24 HOTT, Operating Instruction

Page: 36 / 108

Touch
Touch
Touch
Touch
Touch
Touch
Touch
Hold
ldle-up1
ldle-up2
ldle-up3
TRIM
TRIM
TRIM
TRIM
TRIM
36
Telemetry
Telemetry
Telemetry
Telemetry
4. THR.CRV
This function adjusts the throttle operation curve in relation to the movement of the throttle
stick for each condition Since the throttle curve is closely related with Q.LINK setup, Q.LINK
setup should precede THR.CRV setup.
Call Q.LINK setup page and check Q.LINK setup is completed correctly and touch “BACK”
icon to return FUNCTION page. (Refer to the manual on Q.LINK setup)
In FUNCTIOPN page, touch “THR.CRV” icon to call THR.CRV setup page. You need to mark
the point on graph first and then adjust the operation curve with “DEC”, “INC”, X-axis and
Y-axis buttons. Touch “ST OFF” to switch to “ST ON” then the throttle position line appears
on graph. Move throttle stick and place the line at the desired position between point “L” and
“H” then touch “ENT” icon on the bottom right. Now the new point is marked in graph. You
can mark five points between point “L” and “H” in the same way. Touch ST ON” to switch to
“ST OFF” and complete the point setup. Now touch “DEC” or “INC” button to select point and
touch X-axis or Y-axis to activate and then touch DEC” or “INC” button to adjust the operation
curve. Turn on the preset Q.LINK switch then you may adjust the operation curve of every
Q.LINK as well.