GRAUPNER mz-24 HOTT, Operating Instruction

Page: 86 / 108

86
Touch
Touch
Touch
Touch
Touch
Touch
Telemetry
6-2. Curve mixing type
In the prog.mix page, touch “NEXT” icon to call the next page and touch “INH” icon in the
cross line of NO7 and ACT to switch to “ON”. Touch “NONE” in MST line to access the
channel selection page and touch and activate “NONE” icon to select the desired channel of
MST and SLV. Touch “BACK” icon to return to the prog.mix page. Touch “>>” icon to call the
program mixing setup page. Now, you need to set CTL function.
- CTL setup with a switch
Touch “ON” icon in CTL line to call “Select” message popup then move the switch with your
choice then that switch is designated as on/ off switch and then the switch direction setup
page appears. You may select ON or OFF by touching icons. When the switch is moved to the
direction of ON, the function is operated. Touch “BACK” icon to return to the program mixing
setup page.
- CTL setup with a stick
Hoping that you would refer the explanation as explained above
Here, you need to set the operation value, “L” and “H” points are set by default and you need
to mark 5 points between “L” and “H” on graph first and then adjust the operation curve with
“DEC”, “INC”, X-axis and Y-axis buttons. Touch “ST OFF” icon to switch to “ST ON” then
the blue line appears on graph. Move the designated switch or stick to place the line at the
desired position then touch “ENT” icon on the bottom right. Now the new point is marked in
graph. You may set five points in your favorable position.
Touch
Touch
ACT
A
CTL
B
ACT
A
CTL
B
Touch “PITT >> RUDD” icon in the function page to call PIT >> RUDD setup page. You need
to mark the point on graph first and then adjust the operation curve with “DEC”, “INC”, X-axis
and Y-axis buttons. Touch “ST OFF” icon to switch to “ST ON” then the pitch position line
appears on graph. Move throttle stick and place the line at the desired position between point
“L” and “H” then touch “ENT” icon on the bottom right. Now the new point is marked in graph.
Touch ST ON” to switch to “ST OFF” and complete the point setup. Now touch “DEC” or “INC”
button to select point and touch X-axis or Y-axis to activate and then touch DEC” or “INC”
button to adjust the operation curve.