GRAUPNER mz-24 HOTT, Operating Instruction

Page: 74 / 108

Touch
Touch
Touch
Touch
Touch
Telemetry
Touch Touch
74
1. Q.LINK
This function is used to set Q.LINK and assign the corresponding switch to cope with the un-
expected trouble situation. Since the adjusted value is activated by moving the switch and you
can cope with the crisis with just one switch. It makes you operating the flight much easier.
Q.LINK for airplane type consists of 8 types. (NORMAL, IDEL UP1, IDLE UP2, IDEL UP3,
HOLD, Q.LINK6, Q.LINK7, Q.LINK8) Normal type is set as a default value.
In the transmitter main page, touch “Function” icon to call the Function page and touch
“Q.LINK” icon to call Q.LINK setup page. Q.LINK list is displayed. “1.NORMAL” is the default
value and it cannot be changed.
1-1 NEW
This function is used when you wish to create new Q.LINK. If you may want to set for new
Q.LINK, touch the value in “Q.LINK” line to activate it in blue and touch “NEW” icon in the
right to call “CTRL” and “DELAY” options. In “CTRL” setup, touch “NULL” icon to call “Select”
message popup and move the switch or stick with your choice then the switch or stick is set
to Q.LINK switch or stick. To set “DELAY” function, touch “0.0s” icon to activate in blue and
set the delay time with “INC” and “DEC” buttons. DELAY indicates the time till Q.LINK start to
work after Q.LINK is switched on
FUNCTION MENU (Airplane, Gilder)