S1001.G1 and S1001.G1.77-USA-V1.0
27 / 33
Switch Functions
Motor ON/OFF Function
The motor stop function is active completely independently from the
position of this switch, until after switching on the transmitter the
throttle/pitch stick has not been brought at least once in the motor-OFF
position.
ATTENTION
To prevent accidental motor starts and risk of accident, make it a habit to
move the MOTOR OFF switch forward only during takeoff. Move the switch
backward as soon as the model has landed.
Note
When the motor stop function is on, the CUT-OFF LED blinks red.
Attitude/Rate Mode Switching
♦
Attitude Mode (Beginner Mode)
The stick movement determinates the Copter reaction on Roll and Nick,
allowing a maximal angle of about 50° at 100% of stick movement. The stick
movement acts directly proportionally to Roll and Nick.
After releasing the sticks, the copter automatically moves back to the
centering position.
♦
Rate Mode (Advanced Mode)
The stick movement determinates the rate without limiting angle
movement and without automatically returning to the centering position.
This is an aerobatic mode that allows rolls and flips not suitable for
beginners.
Switch for Additional Functions
♦
LED
To turn on copter lighting, push the switch backwards.
♦
OFF
(middle position)
Place the switch in the middle position to deactivate the LED and FLIP
functions.
♦
FLIP
(Attitude Mode only)
Pull the switch forward to activate the Auto-flip function in Attitude Mode.
The transmitter will emit a 5 second continuous beep. During the beep,
move the roll or nick stick more than 50% of its travel. The copter will
autonomously make a loop in the selected direction.
After the flip it is possible to have small position movements (<10°).
