20 / 33
CAUTION
Never switch the transmitter on while the housing is open!
Open step by step:
1.
Switch the transmitter off before opening the housing.
2.
Open the battery compartment.
3.
Remove the battery box by lifting it gently at one side to release it
from the Velcro tape.
4.
Unplug the connector.
5.
Unscrew the eight screws with a Philips screwdriver.
6.
Hold the two housing halves with both hands and turn the
transmitter upside-down, letting the screws fall on a proper
surface.
7.
Rotate the lower half carefully and fold it to the bottom.
Note
To avoid causing damage, do not touch the electronic boards or the cables
connecting the lower housing with the upper electronic components.
Closing step by step:
1.
Check if the upper and the lower part of the transmitter housing
are correctly coupled and the tiny cables are properly placed.
2.
Screw the housing screws in their shrouds. Reconnect the battery
box.
Centering the Control Stick
Centering step by step:
In the left stick gimbal, locate the adjusting screw (shown circled).
Turn the screw toward the inside of the transmitter until the stick moves
freely from stop to stop, or turn it outward until the stick automatically
resets itself.
Note
The right stick gimbal is specular to the left one.
