34 / 48
S1042_sh_V1
Servo direction and model type
Servo direction
With the exception of CH5 for the 2AILE model type, the direction of
rotation can be set separately for each of the servo 1 ... 5 as described
below under "Programming step-by-step".
In the "REVERSE" line of the LED field, the direction of rotation is indi-
cated separately for each of the channels 1 ... 5:
Red LED blinking = Direction "
normal
",
Red LED solid on = Direction "
reverse
".
The LED indicator lights for about 5 seconds after exiting the selec-
tion menu so as every transmitter switching on.
Note
Through the available optional SMART BOX the servo can be indi-
vidually adapted to the model necessity in the RX SERVO menu in
the receiver.
Model Type
In the
mz-10 HoTT
transmitter you can select one of the standard
configurations. The setting is carried out as described below under
"Programming step-by-step".
"Normal"
Elevator and rudder so as aileron if available are operated by only
one servo each. All the five control functions of the
mz-10 HoTT
transmitter act separately on the servos connected to the receiver.
Summary of Contents for MZ-10 HOTT
Page 2: ...2 48 S1042_sh_V1...
Page 48: ......
