33 / 48
S1042_sh_V1
Control mode
MODE 2
(Throttle/Pitch left)
Nick
Nick
Yaw
Yaw
Throttle/Pitch
Throttle/Pitch
Roll
Roll
Throttle/Pitch
Throttle/Pitch
Yaw
Yaw
Nick
Nick
Roll
Roll
Nick
Nick
Roll
Roll
Throttle/Pitch
Throttle/Pitch
Yaw
Yaw
Throttle/Pitch
Throttle/Pitch
Roll
Roll
Nick
Nick
Yaw
Yaw
MODE 1
(Throttle/Pitch right)
MODE 3
(Throttle/Pitch right)
MODE 4
(Throttle/Pitch left)
Programmed steps control mode
1. Accede to the transmitter programming mode, as described
before.
2. Push the left MODE button so many times as necessary to follow
the rotary menu and reach up for the desired control mode set-
ting.
Pay attention to the number of the beeps.
3x beep
red LED on
>>MODE 1<<
4x beep
red LED on
>>MODE 2<<
5x beep
red LED on
>>MODE 3<<
6x beep
red LED on
>>MODE 4<<
3. As soon as you have reached the desired mode, push and hold
for 3 seconds the MODE button. The actual setting will be adopted
in the transmitter. After the button is released a melody will
sound to confirm and the beep will quit.
4. Switch off the transmitter and remove the programming connec-
tor.
Note
Never use the transmitter to control model while the programming
connector is plugged in it!
Summary of Contents for MZ-10 HOTT
Page 2: ...2 48 S1042_sh_V1...
Page 48: ......
