GRAUPNER MZ-10 HOTT, Manual

Page: 31 / 48

31 / 48
S1042_sh_V1
Acceding to the transmitter programming mode
Switch the transmitter off and connect the included programming
connector in the "DATA / S + -" port on the transmitter back side.
Region setting
• Switch on the transmitter.
Pay attention to the number of the beeps.
Buzzer ... Status LED Description
1x beep red LED on Region setting GENERAL
2x beep red LED blinks Region setting FRANCE
• Push the left MODE button on the front side of the transmitter
so many times as necessary to follow the rotary menu and reach
up for the desired menu option.
• As soon as you have reached the desired mode, push and hold
for approx. 3 seconds the MODE button. The actual setting will
be adopted in the transmitter. After the button is released a mel-
ody will sound to confirm and the beep will quit.
• Switch off the transmitter and remove the programming connec-
tor.
Notes
• The use of the FRANCE mode is no more necessary in France.
• In the course of storing fail-safe settings, any change to "France"
will be lost and must be renewed.
• Never use the transmitter to control model while the program-
ming connector is plugged in it!