background image

33601 VARIO Modul - Graupner HoTT 2.4

                                                                             16

Graupner-Zentralservice

Servicestellen / Service / Service après-vente

Italia

France

UK

Sverige

Espana 

Schweiz

Ceská Republika/Slovenská 
Republika

Wir gewähren auf dieses Erzeugnis eine /  

This product is /  Sur ce produit nous accordons une 

24

Monaten
months
mois

Die Fa. Graupner GmbH & Co. KG, Henriettenstraße 94-96,
73230 Kirchheim/Teck gewährt ab dem Kaufdatum auf 
dieses Produkt eine Garantie von 24 Monaten. Die Garan-
tie gilt nur für die bereits beim Kauf des Produktes vorhan-
denen Material- oder Funktionsmängel. Schäden, die auf 
Abnützung, Überlastung, falsches Zubehör oder unsach-
gemäße Behandlung zurückzuführen sind, sind von der 
Garantie ausgeschlossen. Die gesetzlichen Rechte und 
Gewährleistunsansprüche des Verbrauchers werden durch 
diese Garantie nicht berührt. Bitte überprüfen Sie vor ei-
ner Reklamation oder Rücksendung das Produkt genau 
auf Mängel, da wir Ihnen bei Mängelfreiheit die entstan-
denen Unkosten in Rechnung stellen müssen.

Graupner GmbH & Co. KG, Henriettenstraße 94-96, 73230 
Kirchheim/Teck, Germany guarantees this product for a pe-
riod of 24 months from date of purchase. The guarantee 
applies only to such material or operational defects witch 
are present at the time of purchase of the product. Dama-
ge due to wear, overloading, incompetent handling or the 
use of incorrect accessories is not covered by the guaran-
tee. The user´s legal rights and claims under garantee are 
not affected by this guarantee. Please check the product 
carefully for defects before you are make a claim or send 
the item to us, since we are obliged to make a charge for 
our cost if the product is found to be free of faults.

La société Graupner GmbH & Co. KG, Henriettenstraße 
94-96, 73230 Kirchheim/Teck, Allemagne, accorde sur ce 
produit une garantie de 24 mois à partir de la date d´achat. 
La garantie prend effet uniquement sur les vices de fonc-
tion-nement et de matériel du produit acheté. Les dom-
mages dûs à de l´usure, à de la surcharge, à de mauvais 
accessoires ou à d´une application inadaptée, sont ex-
clus de la garantie. Cette garantie ne remet pas en cau-
se les droits et prétentions légaux du consommateur. 
Avant toute réclamation et tout retour du prouit, veuillez 
s.v.p. cotrôler et noter exactement les défauts ou vices.

Garantie-Urkunde

Warranty certifi cate / Certifi cate de garantie

Übergabedatum
Date of purchase/delivery

Date de remise

Name des Käufers
Owner´s name
Nom de I`achateur

Straße, Wohnort
Complete adress

Domicie et rue

Firmenstempel und Unterschrift 
des Einzelhändlers
Stamp and signature of dealer
Cachet de la fi rme et signature 
du detailant 

Graupner GmbH & Co. KG
Henriettenstrasse 94-96
D-73230 Kirchheim / Teck

Servicehotline 

 (+49) 01805 47 28 76

Montag - Freitag 7:30 -11:45 
und 12:30 -16:00 Uhr

Anguera Hobbies
C/Terrassa 14
E 43206 Reus (Tarragona)

 (+34) 97 77 55 32 0

Graupner Service France
Gérard Altmayer
86, rue St. Antoine
F  57601 Forbach-Oeting

 (+33) 3 87 85 62 12

GiMax
Via Manzoni, no. 8
I  25064 Gussago

 (+39) 30 25 22 73 2

Baltechno Electronics
P.O. Box 5307
S 40227 Göteborg

 (+46) 31 70 73 00 0

Graupner Service Schweiz

Kirchweg 18
CH-5614 Sarmenstorf

 (+41) 56 66 71 49 1

Graupner Service UK
Brunel Drive
GB, NEWARK, Nottingham-
shire
NG242EG

 (+44) 16  36 61 05 39

RC Service Z. Hnizdil
Letecka 666/22
CZ-16100 Praha 6 - Ruzyne

 (+42) 2 33 31 30 95

Kit Flammang
129, route d’Arlon
L 8009 Strassen

 (+35) 23 12 23 2

Jan van Mouwerik
Slot de Houvelaan 30
NL 3155 Maasland VT

 (+31)10 59 13 59 4

Garantie

 von 

warrantied for

garantie de

CD-Electronics GmbH

Belgie/Nederland

Luxembourg

33601 Vario-Modul

Summary of Contents for HoTT 2.4 VARIO Module 33601





















Reviews: