09
33601 VARIO Modul - Graupner HoTT 2.4
5. SETUP DISPLAYS
5.1. Vario
The module provides two vario functions:
1. Continous Vario:
is automatically launched when the menu telemetry VOICE TRIGGER, VARIO is a
switch has been set and then the graphical display of the ELECTRIC AIR MODULE is activated. This
function CONTINOUS VARIO shows the climb or descent of the model permanently by rising or falling
beeps.
2. Sensitivity Vario (only with the modules M-G1/M-G2, mx-12/16 order No. 4754/4755 or mc-19/22
HoTT 4758/4759) - output only trough modules buzzer:
The climb or descent rate is predetermined
by the parameter sensitivity (SENSITIVITY). The sensitivity must be programmed before operation. You
can choose between: (OFF), 0.5 m / sec 3, 1 m / 3 s, 0.5 m / sec,. 1 m / sec. or 3 m / sec. Factory setting
is 1 m / sec.
You should use one of these at the same time.
Sensivity Setup
Select the User Setup display as shown in the diagram. Press the INC and DEC buttons on the SMART-BOX
(resp.
SET
) simultaneously and select User Setup page 2. To save the selected settings, go back to page 1
and choose ,Save Sensor‚ YES.
Parameter
Description
Setup
User Setup
User seup
1 - 2 (page)
Save Sensor
Save the setting in the sensor (VARIO-
MODULE)
YES / NO
Factory Set
Reset to factory settings
YES / NO
Sensitivity
Sensitivity - Continous Vario
OFF, 0.5m/3 Sec.; 1 m/3 Sec.;
0.5 m/Sec.; 1m/Sec. oder 3.0
m/Sec.
Factory setting 1 m/Sek.
Average Number
Number of measurements of the sensor per
Sec.
4 - 40
factory setting: 20
INC + DEC
Vario Sensor < >
>User Setup :
Save Sensor?
Factory Set?
page 1
No
No
page 1
No
No
INC + DEC
INC
page 2
1 m/ 3s
DEC
Vario Sensor < >
>User Setup :
Save Sensor?
Factory Set?
Select Sensitivity
>User Setup :
Sensitivity
:
Average Num:
20
