Introduction
HD video mode
1-7
Clear
Clear
A 1
Star 4P
ND1/4
B 2
Star 6P
ND 1/16
C 3
Soft focus
ND 1/64
D 4
Camera card slot
Insert your camera card into this slot with the chip on the card facing
the front of the camera. Push the card home until it fits snugly.
A camera card is not required for normal operation of the camera.
Note
Only use an original camera card.
Store the owner’s card in a safe place.
1
1
Access control
The owner’s card or the PIN code is used to access special set-up
and security features of the camera. Inserting the owner’s card into
the camera gives direct access to the Security menu. If you select
the Security menu without this card inserted, you must enter the
correct PIN code to gain access to this menu.
User levels
Four user levels can be set in the security menu. These restrict
access, in varying degrees, to the operational controls. The
appendix indicates which functions are available at each user level.
Summary of Contents for LDK 5490
